Smarter Washing, Fewer Chemicals — Made in Korea
The BioWashBall is a detergent-free laundry ball that cleans everyday loads using a functional ceramic blend. Reusable for 1,000+ washes — a durable, low-impact product line built for wholesale partners and private-label programs worldwide.
Contact for MOQ & Pricing Distributors · retailers · OEM / ODM inquiries welcome
A More Sustainable Way of Living
Why More Households Are Choosing Gentler Daily Habits
Around the world, consumers increasingly favour products that reduce chemical load, cut packaging waste, and last longer — a demand your retail shelf can answer.
Less Excess
Shoppers are rethinking constant-consumption habits and looking for more balanced ways to care for everyday essentials.
Gentler Care
Clothing, towels and bedding sit against the skin daily, so many prefer routines that are gentler and lower in residue.
Peer-reviewed study
Environmental Awareness
Using less detergent per load means fewer chemicals entering wastewater — a story that resonates with eco-labelling trends worldwide.
Detergent impact researchGentle Technology
How This Detergent-Free Laundry Ball Works
Three mechanisms work together to loosen everyday soil while keeping detergent use to a minimum. Each one sets up the next.
Friction & Water Pressure
Raised bumps across the ball create friction against fabrics, amplified by water pressure through each cycle — the mechanical force that lifts everyday soil.
Mineral Release
The fired ceramic gives up calcium, magnesium and potassium into the wash water, steadily, cycle after cycle — the minerals that make the next step possible.
Alkaline Activation
Those minerals raise the water’s pH toward 9–10 — the same principle detergents rely on — helping lift protein and grease without added chemicals.
For tougher stains, whites, or heavily soiled loads, add a very small amount of detergent alongside BioWashBall. This keeps the routine practical while still using less overall.
Inside the BioWashBall
Various Functional Ceramics
This detergent-free laundry ball is filled with a blend of engineered ceramic beads, each type carrying a distinct role — conditioning the water, raising its alkalinity, and keeping the drum fresh. Four of the principal types are shown below.
Every ceramic in the blend is formed from mineral-rich clays and sealed inside the ball's core. Working together, they reproduce much of the chemistry a detergent would normally provide — raising the water's pH and helping release dirt — so everyday loads can be washed with little or no detergent.
Far-Infrared
Emits in the 8–14 μm band, lowering surface tension for deeper penetration into fabric. Certified by an independent Korean testing institute.
Alkaline
Raises the wash water toward pH 9–10, lifting protein and grease the way a detergent would.
Anti-Bacterial
Helps break down organic residue to keep the drum and the laundry fresher between washes.
TEM Ceramic
Clay fermented with TEM culture for six months, then fired. A monthly sun-dry keeps the pores clear.
How it is madeInside the TEM Ceramic
Six Months of Fermentation, Then 1,400 °C
TEM stands for Total Effective Microorganism. Here is what that actually means, why the clay sits for half a year before anything is shaped, and what is still in the bead once the kiln has done its work.
-
01
Ferment — six months, minimum
High-purity clay is blended with the microbial culture and then left alone for at least six months. There is no way to hurry this part: the culture needs that long to work through the clay, break down what it can and leave the minerals from its own biomass behind.
-
02
Form — shaped into beads
The fermented clay is rolled into small beads and dried. Bead form is deliberate: it gives the same volume of ceramic far more surface to meet the water with than a solid block would.
-
03
Fire — 800 to 1,400 °C
In the kiln the clay hardens into a crystalline ceramic, and the minerals left behind by six months of fermentation are locked into that structure for good. The organic matter burns off as it goes, leaving the voids it occupied behind — so what comes out is a hard, porous bead with the mineral content built into its own lattice.
Four things make this clay different
Not every clay can do this job. Ours is selected and prepared for four reasons, and the last one is what holds the other three together.
A micro-porous body
Countless tiny openings run through every bead. That is where the water actually meets the ceramic — and why a small handful of beads can act on a full drum of wash water.
A rare mineral makeup
The clay is chosen for what is in it. Calcium, magnesium and potassium sit in the fired body and pass slowly into the water, cycle after cycle.
Far-infrared emission
Once fired, the ceramic gives off far-infrared energy — measured and certified by an independent Korean testing institute. The report is further down this page.
Six months with TEM culture
The clay is blended with TEM culture and left for at least half a year before a single bead is shaped. This is the step that makes the effect hold up over years of washing.
Take the fourth away and the first three fade. The long fermentation is what fixes the minerals into the clay and opens the pores that carry them out — which is why we wait six months instead of six weeks.
That is the range a laundry detergent works in, and it is why grease and protein stains let go — alkaline water breaks down oils and loosens protein soil. BioWashBall reaches the same range with minerals instead of surfactants. Nothing foams, nothing needs rinsing out, and nothing heads down the drain after the cycle ends.
Bench measurement, HANNA HI 8314 membrane pH meter: 9.79 with TEM ceramic immersed in tap water. In-machine pH depends on load volume, water hardness and how many balls are used.
Ion Farms has been firing this ceramic and shipping it worldwide for over twenty years. Cleaning performance, material safety and far-infrared emission have all been measured by independent institutes — the certificates are further down this page. Read the full story of TEM ceramic →
Product Specifications
At a Glance — For Wholesale Partners
Core specifications for procurement, listing, and private-label evaluation.
Full technical datasheet and pricing available on wholesale inquiry.
Private Label & OEM
Same Ceramic Inside. Your Colour Outside.
The ceramic blend inside and the way it is fired never change — that is the part your customers buy. The housing around them is a moulded part, and moulded parts can be made in whatever colour your shelf calls for.
Green is our standard housing and ships from stock. The other four are colours we have already run for partners — available, like any colour, from 50,000 pieces.
- Green Stock
- Yellow
- Red
- Sky Blue
- Purple
- + your colour from 50,000 pcs
One number decides it: 50,000
The mould stays the same whichever colour you order — the colour comes from the pellets that go into it. Switching means purging the machine and running your colour as its own batch, so a custom colour is a question of batch size rather than tooling. Our private-label and OEM programme starts at 50,000 pieces, with the housing run in a colour of your choosing and matched to the reference you send us.
Below that, our standard green ships from stock in whatever quantity suits you. There is no tooling charge either way — the mould is already ours.
-
Your brand on the ball. Custom housing colour from 50,000 pcs, plus printed packaging and your logo in place of ours.
-
No change to what is inside. The same fired ceramic, the same test certificates behind it.
-
Made in our own factory. Ion Farms has moulded and fired this product in Incheon since 2001.
Officially Tested & Verified
Laboratory Test Reports
Every performance claim is backed by independent laboratory testing — washing power, fabric care, anti-bacterial performance and material safety. Click any document to open it in full.
Testing was carried out by independent institutes including KATRI (Korea Apparel Testing & Research Institute), KTR (Korea Testing & Research Institute) and Specialized Technology Resources, Inc. (USA).
Several reports were issued under earlier model names such as RolyPoly and Bio Globe. The TEM ceramic core tested in those reports is unchanged in the current Washball Plus — only the outer housing has been revised. Full-resolution certificates and additional documentation are available to wholesale partners on request.
Visual Proof
Real-World Test Video
See the ball in motion inside the drum, dosage guidance, and realistic washing expectations for everyday loads.
Prefer YouTube? Watch the product overview on H2 Science Lab →
Simple Routine
Four Steps to Using Your Detergent-Free Laundry Ball
Add the Ball
Place BioWashBall into the drum as part of your regular laundry routine.
Load Laundry
Add your clothes, towels, or bedding as you normally would.
Minimal Detergent
Use only a small amount of detergent when needed, keeping the routine light.
Run & Refresh
Run a normal cycle. A monthly sunshine refresh keeps the ball performing.
Frequently Asked Questions
BioWashBall — What Buyers Ask
What is BioWashBall and how does it clean?
How many washes does one ball last?
What is TEM ceramic?
Is it suitable for sensitive skin and eco-focused shoppers?
Which washing machines is it compatible with?
Do you offer wholesale, private-label, or OEM/ODM terms?
