How to Check PFAS in Your Water: What "Not Detected" Really Means
How to check PFAS in your water became a pressing question on October 23, 2026. A new study found that U.S. reports may show about half of the PFAS actually in tap water. The reason is simple: low results get counted as zero. Below: how to read your own report and which free tools to use. Then, when a lab test or a filter makes sense.
By 1TheWater Editorial Team · BioNatural Co., Ltd. (Ionfarms), a Korean maker of water ionizers and hydrogen water devices since 1998 · Published October 27, 2026. Disclosure: we make water filtration and water ionizer products, some of which are linked below.
Why this is trending now
On October 23, 2026, Cell Reports Sustainability published a study by Gehendra Kharel of Texas Christian University. It re-analyzed EPA's national PFAS data and found the national average may be roughly double what reports show. The Washington Post, Gizmodo and News-Medical covered it within a day.
The same week, Newsweek mapped U.S. systems with PFOA or PFOS at or above federal limits (October 22). A New Jersey study of ultra-short PFAS in tap water and sports drinks also kept circulating. Americans now want one thing. A way to check their own tap.
Key findings
- "Not detected" on a water report means "below the lab's reporting limit." It does not mean zero.
- Your utility's PFAS results are free in two places: your annual report and EPA's UCMR 5 Data Finder.
- Private well owners need their own test from a state-certified lab.
- Boiling does not remove PFAS. Certified filters can reduce some of them, but performance varies by type and upkeep.
- The new study models averages. It does not say any single below-limit result is a health risk.
What did the new PFAS study find?
PFAS (per- and polyfluoroalkyl substances) are man-made chemicals with very strong carbon and fluorine bonds. They break down so slowly that people call them "forever chemicals."
From 2023 to 2025, EPA required many public water systems to test for 29 PFAS. This program is called UCMR 5, the Fifth Unregulated Contaminant Monitoring Rule. It produced the largest PFAS dataset for U.S. tap water so far.
Study box · Kharel, Cell Reports Sustainability, October 2026
What was studied: more than 1.8 million PFAS records from EPA's national drinking water dataset. They cover 9,991 community water systems and 25 PFAS.
The problem: 98% of results sat below the minimum reporting level. Standard summaries count those results as zero.
The method: statistical models generated 500 estimates for each below-limit value, then averaged them.
The result: counting below-limit results as zero captured only 44% of the modeled average. For the six EPA-regulated PFAS, the national average rose from about 2.6 to about 5.2 ng/L.
The limits: the below-limit values are model predictions, not measurements. In the author's words, the study "does not establish that every below-limit result poses a health risk."
So the study is about bookkeeping, not a new contamination event. Still, it changes how you should read your own report. Kharel put it plainly: "When a water quality report says 'not detected,' that means below the reporting limit, not zero."
What does "not detected" mean on a water quality report?
Every lab method has a floor. Below that floor, the lab cannot report a number with confidence. For UCMR 5, that floor is the minimum reporting level, or MRL.
The MRL reflects lab capability, not health effects, EPA says. For PFOA and PFOS, the UCMR 5 MRL is 4 ng/L (4 parts per trillion). For PFHxS and PFBS it is 3 ng/L, and for GenX chemicals it is 5 ng/L.
When a sample falls under that floor, the report shows "<MRL," "ND" or "not detected." EPA's own Data Finder notes that results below the MRL are treated as zero in averages. That is the gap the new study measured.
Does this mean your water is unsafe? Not by itself. It means "ND" tells you the level is low, not absent. If you want a closer answer, you need the number behind the "ND."
How to check PFAS in your water in 4 steps
Here is how to check PFAS in your water without spending money first. If you are on a public water system, steps 1 to 3 cost nothing.
Step 1: Where do I find my water quality report?
Your Consumer Confidence Report (CCR) is the annual water quality report every community water system must send. EPA says suppliers must deliver it by July 1 each year. If you lost yours, try EPA's Find Your Local CCR tool or call the number on your water bill.
Scan the tables for PFOA, PFOS, "PFAS" or "UCMR." Some utilities list PFAS in a separate "unregulated contaminants" section.
Step 2: How do I use EPA's UCMR 5 Data Finder?
Open the UCMR 5 Data Finder. You can filter by state, water system name or ID, contaminant, and results at or above the MRL. Your system ID usually appears on your CCR.
No results? EPA notes your system may not have been required to monitor under UCMR 5.
Step 3: What should I ask my water utility?
Ask three questions. Which PFAS did you test, and when? What were the exact results, including any values the lab saw below the MRL? Do you plan more PFAS testing before the 2029 compliance date?
A precise answer beats "ND." If the utility only has "below MRL," that is still useful. It tells you the level sat under the lab floor on that sample date.
Step 4: How do I test a private well for PFAS?
Public data does not cover private wells. EPA advises asking your state environmental or health agency for a list of certified labs. Those labs use "EPA-developed testing methods in drinking water." Ask the lab which PFAS it reports and what its reporting limits are. Then keep testing on a regular schedule, as EPA recommends.
Which PFAS source tells you what?
Each source answers a different question. The table below shows which one to start with and where each one falls short.
| Source | What it shows | Cost | Main limit |
|---|---|---|---|
| Annual CCR | Regulated contaminants found in your system's water, plus source water | Free | Often shows "ND" with no number behind it |
| UCMR 5 Data Finder | Results for 29 PFAS tested between 2023 and 2025 | Free | One 12-month window per system; not every system included |
| Call to your utility | Exact values, sample dates, reporting limits, future plans | Free | Depends on what the utility recorded and will share |
| State-certified lab test | Your own tap or well, today | Varies by lab | One sample is one snapshot; PFAS lists differ by lab |
Bottom line: start free with the CCR and the Data Finder. Pay for a lab test when you use a well, or when your system has no PFAS data at all.
Which PFAS limits apply right now?
In April 2024, EPA set the first national PFAS limits for drinking water. PFOA and PFOS each have an enforceable limit of 4.0 ppt. PFHxS, PFNA and GenX chemicals were set at 10 ppt, with a combined "hazard index" for mixtures.
On May 18, 2026, EPA proposed two changes. One keeps the PFOA and PFOS limits but lets systems request two more years, moving compliance from 2029 to 2031. The other would rescind the limits for PFHxS, PFNA, GenX and the mixture index. Both were still proposals, not final rules, as of EPA's last page update.
What does that mean for you? The 4 ppt line for PFOA and PFOS is the number to compare against today. Note that the UCMR 5 MRL for both is also 4 ppt. So an "ND" for PFOA can sit just under the legal limit and still read as zero.
Can a filter catch what your report misses?
Yes, some filters can reduce PFAS, but not all filters do it equally. EPA lists activated carbon, ion exchange resins and reverse osmosis as home options. It tells buyers to look for NSF/ANSI 53 or 58 certification for PFAS reduction. It also says to replace cartridges on schedule.
Result block · How home filters performed
A Duke University and NC State team tested 76 home filters in North Carolina (Herkert et al., 2020):
- Under-sink reverse osmosis reduced GenX and other PFAS by 94% or more.
- Activated carbon pitchers and fridge filters removed 73% on average, ranging from complete removal to none.
- Whole-house systems varied widely, and in some cases PFAS levels were higher after the filter.
A separate 2026 study from the New Jersey Institute of Technology looked at an ultra-short PFAS called TFA. It turned up in 64 of 70 New Jersey tap samples. The researchers say TFA binds poorly to the activated carbon and ion exchange media that catch longer PFAS.
Two lessons follow. First, the label matters more than the shape: check the certification listing on the NSF product database. Second, upkeep matters as much as the filter. In October 2026, the Dutch Consumers' Association also warned about unsupported "removes PFAS" ads. Ask for the test data.
Where does a water ionizer fit? A home ionizer is a two-stage system. Our Alpha 1700 and Alpha U1700 use two replaceable cartridges. Water passes an ALPHA UF membrane, then an ALPHA EM CARBON filter. Then the Optimized 7 SMART Plate cell adds the pH and hydrogen changes. Filtration is the purifying stage, and our guide Does a Water Ionizer Purify Water? explains how the two stages split the work.
If your report shows PFOA or PFOS near or above 4 ppt, follow EPA's advice first. Choose a system certified to NSF/ANSI 53 or 58 for those chemicals. Our water ionizer vs reverse osmosis comparison shows how an RO stage and an ionizer can work together. For costs against bottled water, see filtered water vs bottled water.
What should you do after you check?
Use this short checklist once you have your numbers.
- Write down each PFAS result, the sample date and the MRL next to it.
- Compare PFOA and PFOS to EPA's 4 ppt limits, not to zero.
- Treat "ND" as "below the lab floor," not as zero.
- If you use a well, book a state-certified lab and repeat the test over time.
- Do not rely on boiling. The Minnesota Department of Health states that "boiling water will not remove PFAS."
- If you add a filter, check its NSF/ANSI 53 or 58 PFAS listing and set a cartridge reminder.
- If you have health concerns, talk with your physician. EPA notes that levels above the standard do not necessarily mean health effects will occur.
Frequently asked questions
How can I find out if my water has PFAS?
Start with your annual water quality report (CCR). Then search EPA's free UCMR 5 Data Finder by state and system name. Call your utility for exact values and reporting limits. If you use a private well, test with a state-certified lab using EPA methods.
What does "not detected" mean on a water quality report?
It means the result was below the lab's minimum reporting level, not that the water had zero PFAS. For PFOA and PFOS, the UCMR 5 reporting level is 4 parts per trillion. A 2026 study found that counting these results as zero roughly halves national PFAS averages.
What is the EPA limit for PFAS in drinking water?
EPA's 2024 rule set enforceable limits of 4.0 ppt each for PFOA and PFOS. It set 10 ppt for PFHxS, PFNA and GenX chemicals, plus a mixture hazard index. In May 2026, EPA proposed keeping the PFOA and PFOS limits with an optional extension to 2031. It also proposed rescinding the others. Neither proposal was final.
Do I need to test my well water for PFAS?
Public PFAS data does not cover private wells, so testing is the only way to know. EPA advises asking your state environmental or health agency for state-certified labs. Those labs use EPA-developed methods. Test again on a regular schedule.
Does boiling water remove PFAS?
No. The Minnesota Department of Health states that boiling water will not remove PFAS. Use a filter certified for PFAS reduction or an alternate water source if your levels are high.
Do water filters remove PFAS?
Some do. In a 2020 study of 76 home filters, under-sink reverse osmosis cut PFAS by 94% or more. Carbon pitchers averaged 73%, with wide variation. EPA recommends filters certified to NSF/ANSI 53 or 58 for PFAS reduction, with cartridges replaced on schedule.
Can a water ionizer reduce PFAS?
Any PFAS reduction in a water ionizer comes from its filter stage, not from electrolysis. Alpha ionizers use an ALPHA UF membrane and an ALPHA EM CARBON cartridge before the plate cell. Is your PFOA or PFOS near the 4 ppt limit? Then pair it with a system certified to NSF/ANSI 53 or 58 for those chemicals.
Where should you go next?
Alpha U1700 Faucet Ionizer
ALPHA UF membrane and EM CARBON filters feed the Optimized 7 SMART Plate cell. Alkaline, purified and acidic settings.
See the Alpha U1700Water Science & Studies
Plain-English breakdowns of new drinking water research, from PFAS to microplastics.
Browse the hubBecome a Distributor
Korean-made water ionizers and hydrogen water devices for retailers and distributors worldwide.
Send an inquiryDisclaimer
This article is for general education and is not medical, legal or engineering advice. PFAS rules were under review at publication; check EPA and your state for current limits. Studies cited include modeling and field sampling research, labeled as such. Our products are not intended to diagnose, treat, cure or prevent any disease. If you have a medical condition, talk with your physician.
ALPHA water ionizers hold Korean MFDS medical device approval; they are not FDA approved.
References
- Kharel G. Censoring-aware models quantify systematic underestimation of PFAS occurrence in US drinking-water monitoring. Cell Reports Sustainability. October 23, 2026. https://doi.org/10.1016/j.crsus.2026.100893
- News-Medical. PFAS levels in United States drinking water may be underestimated. October 24, 2026. news-medical.net
- Goitia-Doran S. Drinking water may have much more "forever chemicals" than EPA reports. The Washington Post, via The Spokesman-Review. October 23, 2026. spokesman.com
- Gibbs A. Map shows US drinking water contaminated with "forever chemicals." Newsweek. October 2026. newsweek.com
- Gu S, Chitthaluri S, Etsiwah E, Pandey B, Venkatesan AK. Occurrence of ultra-short chain PFASs in bottled beverages and New Jersey tap water. Environmental Science & Technology Letters. 2026. https://doi.org/10.1021/acs.estlett.6c00768 (summary: News-Medical)
- Herkert NJ, Merrill J, Peters C, et al. Assessing the effectiveness of point-of-use residential drinking water filters for perfluoroalkyl substances (PFASs). Environmental Science & Technology Letters. 2020. https://doi.org/10.1021/acs.estlett.0c00004
- U.S. EPA. Per- and Polyfluoroalkyl Substances (PFAS): PFAS National Primary Drinking Water Regulation. Updated May 18, 2026. epa.gov
- U.S. EPA. Fifth Unregulated Contaminant Monitoring Rule (UCMR 5) Data Finder. Updated August 28, 2026. epa.gov
- U.S. EPA. UCMR 5 Data Summary (minimum reporting levels). epa.gov (PDF)
- U.S. EPA. CCR Information for Consumers. epa.gov
- U.S. EPA. PFAS in Private Wells. epa.gov
- U.S. EPA. Reducing PFAS in Your Drinking Water with a Home Filter (fact sheet). April 2024. epa.gov (PDF)
- Quinn M. EPA to formally rescind certain PFAS drinking water regulations. Waste Dive. May 19, 2026. wastedive.com
- Minnesota Department of Health. Home treatment for PFAS. health.state.mn.us
- NL Times. Dutch Consumers' Association warns of misleading claims of water filters removing PFAS. October 26, 2026. nltimes.nl
- NSF. Certified drinking water treatment units listing. info.nsf.org